FAAC Solar Panel Kit is designed for use with our B614 24v Barrier, B680H 24v Barrier, C720 and C721 Sliding Gate Operators, E124 24v Control Board and E024S Control Board. The kit has been sized to work in locations where supplying mains voltage would not be practical or the cost implications would be significant and the expected usage is relatively low throughout the day.
|N-SOLAR200W KITS||N-SOLAR600W KITS|
|2||100w Solar Panels 1200mm x 54mm x 35mm each||2||300W Solar Panels 1640mm x 990mm x 35mm|
|1||10A 12V/24V Controller||1||20A 12V/24V Controller|
|1||MC4 Connector (pair)||1 ||TMC4 Connector (Pair)|
|1||5m Battery Cable 2.5mm2 with fuse||1||5m Battery Cable 2.5mm2 with fuse|
|2||12V 45Ah Battery||2||12V 45Ah Battery|
|1||Steel Enclosure 210mm x 500mm x500mm||1||Steel Enclosure 210mm x 500mm x500mm|
|1||Vent for Enclosure||1||Vent for Enclosure|
|1||Battery Shelf||1||Battery Shelf|
|3||Cable Gland||3||Cable Gland|
|1||Molex Connector||1||TMC4 Connector (Pair)|
Download the Solar Kit Wiring Diagram here.
For your benefit, we have created a calculator in order to determine if the Solar Panel Kit will be suitable for your system based on the parameters provided (Please note that the calculator refers to the E124 Control Board with 2 no S800 Hydraulic Operators as they would generate the greatest load on the Solar Panel Kit). If you have any questions on the sizing, please do not hesitate to contact us to discuss your requirements further.
Download the calculator here