Retrofit Kit
Retrofit Kit
| Model Variant | Part Number |
|---|---|
| Retrofit kit | 105041 |
- Standard USB port for firmware upgrade and download/upload configurations, timer, events log.
- Basic and Advanced programming using display and 3 buttons allowing configuration of 6 programmable inputs and 2 programmable outputs.
- Dedicated terminals for accessories and emergency inputs.
- Timer function integrated (programmable using LK EVO only)
- CANBUS for smart management of INTERCOM - series network between automatic doors - one door program selector controls up to 15 doors
- INTERLOCK - Entrances where the opening of one door is controlled by the closing of the other (airlock system).
- MASTER/SLAVE -connect two single doors with LH and RH openings in order to create a fully synchronized 200 + 200KG double leaf automation.
A minimum of 100mm x 100mm clear space is available then the retrofit kit will fit inside. (Other options available on request with full details of space available required.)
The RKU Retrofit Kit is compatible with the main automatic door profiles Besam, Ditec, Dorma, Manusa, Geze, Gilgen, Record. Below are the details of the specified models and profiles:
BESAM ADS | DORMA ES200 | GILGEN SLX | BESAM EMD | DORMA ES200 OR | RECORD STA20 H10 | DITEC BIS OR. | GEZE BO | MANUSA ACTIVA | DITEC BIS VERT. | GEZE TSA 360 | DITEC VALOR | GILGEN SLM
The RKU Kit contains the following parts:
- 1 x A1400 Motor and Gearbox with Encoder
- 1 x E1SL Control Board and Power Supply mounted on a Bracket
- 1 x A1400/1000 Battery Back-Up
- 1 x A1400 Return Pulley
- 6mtrs of Drive Belt
- 2 x Adjustable Belt Brackets to mount to existing Carriage Wheel Assemblies*
- 4 x Mounting Brackets and associated fixings to mount above to existing sliding door header**
- 1 x LK Evo (6 Button Program Selector)
* (the kit allows for single and bi-parting sliding doors)
** (please note that additional brackets may be required as per manual below)
How to install the FAAC RetroFit Kit (video)
FAAC - Simply automatic.
